Garages & Underground Car Parks | Ramps and Driving Lanes

With growing parking areas it takes longer to find one of the last vacant parking spaces in a car park or an underground parking.

Searching the last vacant parking space does not only take time, it is annoying, consumes energy and due to the exhaust fumes the breathing air degrades in car parks and underground parkings.

With MagSense® MobiliSis® offers individual parking space detection which ensures direct guidance to vacant spaces. Offer your customers a direct and, thus, optimum guidance to the vacant parking spaces.

Interested in MagSense?


Parking space detection through the ceiling

Detection through the ceiling allows MagSense® accurate detection at the upper park level, too. And in contrast to other technologies whose sensors have to be glued to the surface, the winter services will not be impeded either.

Bracket for ceiling installation

With the illustrated mounting the sensor on the ceiling can be fixed. The bracket can be either glued or screwed. Then the sensor is used with a simple click.

Housing for ceiling mounting

The housing contains the magnetic field sensor and can be fixed by simply clicking in the illustrated bracket. In this way, an exchange or a reacting sensors is also optionally comparatively simple. These can be the case solved with a little pressure from the holder and reinstall elsewhere.

Installation im Boden Installation in the ground

Another installation option is to install the floor. If ducts have already been laid in the construction of the parking garage, the sensor strand can be directly fed into this, which is certainly the least expensive type of installation. If a sensor technology is retrofitted, it is carried over a narrow cut in the ground, in the sensor, then the strand is set and encapsulated. To protect the sensor against mechanical stresses it is covered with quartz sand and a PE-string before casting.

Your benefits

  • easy construction
  • low cost
  • rental basis possible